Washington Fishing

The Online Source for Washington Fishing Information

Another Crankin’ Story by IB 07-09-09

I recently started making my second crankbait. This one was made using the through-wire construction method, which I found to be a bit more challenging. I also decided to try a slightly different lip angle and use more weight to slow the rise of the crankbait, just to see what that would do.



I had to test the bait because I figured there would be no point in painting it if it didn’t work properly.

I got to the lake’s parking lot at 6:20 pm and was on the dock by 6:25 pm. I only had about 10 minutes to field test it. You ever have that feeling in your gut to use a certain technique (crankbaits) because you can feel it? Well, I was feeling it, that crankbaits were the ticket to the bass today, and I believed it with a warm and soothing confidence that could not be perceived or misconstrued as arrogance. No way. Just a gut feeling.


Buoyancy test: Passed. The bait dipped and rose to the surface and more slowly that the first crankbait. Check!

Wiggle test: Passed. It wiggled somewhat like the first crankbait, but it was less lively, probably a result of having put more lead into the body. This was a desired trait to achieve, to help me throw the bass or other fish a curve ball if they didn’t want a faster rising crankbait. Check!

Casting test: Passed. Like the first one, this crankbait casts very well and its extra weight helped it to cut through the air even better. Check!

During all of these tests, I engaged in pleasant banter with others on the dock. When they learned the lure was homemade, they thought it was pretty neat.

I don’t know what it is about field-testing my crankbaits, but I’m batting two for two if ever a five-minute mercy rule were imposed on me. I am now in full support of such a regulation. About five minutes after my first cast, I felt the bait get caught up on top of some grass. Doing what we bass anglers normally do, I ripped it free and felt a gentle take. It was definitely a take because grass doesn’t bite back.

I blurted, “Wow! I got one! Oh my gosh. I really got one! Yeah!!!!” as I reeled up some line and gently pulled the rod back. Never mind the disbelief of the folks on the dock next me as they peered over the rail to see for themselves. I couldn’t believe it. There I go again, shouting and laughing like I did last time, just embarrassing myself in public.

When she got close to the dock’s rail, I could see she was about a 2.75 lb. bass that was lightly hooked by one tip of a treble. I got her close enough for the folks to see her. Next, I let my line go slack so she could free herself, which she managed to do. I am glad she freed herself because if she couldn’t I would have had to reach through the rails to lip her and risk getting hooked and get the lovely fishy smell on my hands that doesn’t come off so easily and then the Mrs. will know I went fishing, yada, yada, and then get busted because I was supposed to come straight home, and never hear the end of it.

I made it home by 6:45 pm, in good time to start the grill up for dinner.

Thanks again for coming along and sorry there’s no picture of the bass. My camera phone doesn’t take photo-worthy pictures anyway. There were many witnesses to boot. Goodness gracious! I still can’t get over catching a bass on an unpainted and unfinished crankbait.

-ib

Views: 243

Comment

You need to be a member of Washington Fishing to add comments!

Join Washington Fishing

Comment by Zackery Shaff on July 14, 2009 at 11:26am
No, I have no idea about the propionate, just know a lot of the balsa guys like it. I also saw that episode of "Hunt for Big Fish" and its definitely worth taking a peek at. Give me a couple of days to get my new eyes in and i'll post my two finished baits. They're pretty awesome!
Comment by Ronald Hobbs, Jr. on July 10, 2009 at 12:35pm
Do you ever watch larry dahlbergs 'Hunt for Big Fish' one of the episodes shows how to make molds for crankbaits, topwaters and other hardbaits, you basically need a bait to mold them pouring the cavity with plastic, he adds weight, thru wires and or other substances to make the plugs do something different, it was a great show. I just thought you might find it interesting if you haven't seen it.
Comment by islandbass on July 10, 2009 at 11:07am
Zack,

I look forward to seeing your work!! I don't protect it at the field testing stage because it could be a wasted effort in time and materials if I seal it and it doesn't work properly. If it passes the tests in stability and wiggling, then it gets the greenlight to have me invest in painting and sealing.

My field testing takes no more than 5 minutes and I give the bait enough time to dry completely before proceeding with painting and sealing. The propianate looks like a great sealant material. I have read the posts about it at TU and will probably incorporate the step you proposed to strengthen the bait on future cranks.

Do you have any thoughts about propianate you'd like to share?

Thanks!
Comment by Zackery Shaff on July 10, 2009 at 10:22am
Awesome. Have you tried some of the wood sealants on your baits, like proprionate or urethane before painting? That could solidify the grain and give the devcon something more solid to protect since it doesn't flex, but the wood underneath does. Anyways, nice job again. I will have to blog about my newly painted crankbait (looks freakin sweet).

Blog Posts

Old Farts Tournament on Potholes

Posted by Tom Melowitz on September 7, 2019 at 2:45pm

New Group Added!

Posted by Eric Urstad on April 3, 2019 at 7:38pm

© 2024   Created by Jordan Doucet.   Powered by

Badges  |  Report an Issue  |  Terms of Service