Limit Out Marine Open House

Replies to This Discussion

Permalink Reply by Russ Baker on February 28, 2010 at 8:32pm

Tom, I'll check when I get to the office

Tom Edwards said:

Russ, did you get my e-mail? Sent it to the Limit Out e-mail addy.

Permalink Reply by Tom Edwards on February 28, 2010 at 9:32pm

LOL ya, we'll see. :-)

Permalink Reply by Ronald Hobbs, Jr. on March 1, 2010 at 7:47am

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

Permalink Reply by Russ Baker on March 1, 2010 at 8:22am

Ron,

Accept my friend request and I will tell you more.

Permalink Reply by BigBass Dez on March 1, 2010 at 9:50am

Mike ,
Didnt know you attended man , sorry i missed ya bro~ ! I was proberly too busy eating all of russ Free hotdogs and cookies ..haha As for the open house , it was coo had some very good conversations with Rich (basspro) and many others the set up down there looks nice ..I do wish Russ the best with this venture and thanks for everything man !!

Mike Peters said:

Had a great time at the open house Russ. Everything looks impressive, especially the line of Phoenix boats (the red/black 721 keeps looking nicer and nicer). Can't wait to get out on the water in one of them.

Permalink Reply by Russ Baker on March 1, 2010 at 8:31pm

Ron,

We can take care of your Yamaha or Mercury.

Russ

Ronald Hobbs, Jr. said:

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

Permalink Reply by Ronald Hobbs, Jr. on March 1, 2010 at 8:36pm

Sorry Russ I was at a 21st bday party, there was just nothing said about the motors that are getting rigged I think probably the #1 thing that goes wrong with anything is a motor I have never had a major problem happen with anyone boat. I guess without a motor your baot is no good.

Russ Baker said:

Ron,

We can take care of your Yamaha or Mercury.

Russ

Ronald Hobbs, Jr. said:

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

Permalink Reply by Russ Baker on March 1, 2010 at 8:43pm

Ron,

I have both of these brands - Yamaha SHO and Mercury Pro XS's

Ronald Hobbs, Jr. said:

Sorry Russ I was at a 21st bday party, there was just nothing said about the motors that are getting rigged I think probably the #1 thing that goes wrong with anything is a motor I have never had a major problem happen with anyone boat. I guess without a motor your baot is no good.

Russ Baker said:

Ron,

We can take care of your Yamaha or Mercury.

Russ

Ronald Hobbs, Jr. said:

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

Permalink Reply by Ronald Hobbs, Jr. on March 1, 2010 at 10:25pm

So do they come factory rigged? I am pretty sure that Skeeters come factory rigged with only yamahas. Is this the same for your new boat line or if someone wanted a E Tec could you do that?

Russ Baker said:

Ron,

I have both of these brands - Yamaha SHO and Mercury Pro XS's

Ronald Hobbs, Jr. said:

Sorry Russ I was at a 21st bday party, there was just nothing said about the motors that are getting rigged I think probably the #1 thing that goes wrong with anything is a motor I have never had a major problem happen with anyone boat. I guess without a motor your baot is no good.

Russ Baker said:

Ron,

We can take care of your Yamaha or Mercury.

Russ

Ronald Hobbs, Jr. said:

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

Permalink Reply by Mark Maderos on March 2, 2010 at 5:37am

Hey Ron,
The Phoenix OEM's with all the brands of motor's. So if someone wanted an ETEC, SHO or whatever, the Phoenix team, factory rigs the boat. It's a marketing thing for them. They didn't want to be tied to a motor company. Not that they haven't tried to talk Phoenix off the cliff to go with Merc, Yammie, or Etec. When the new Phoenix's arrived they were rigged by the factory for the SHO's.
Ron, what's your opinion of the new SHO and what are you hearing from the FLW tour guys. Is this the new / next wave of technology with engines or guys more a wait and see before they jump on the band wagon?

Mark


Ronald Hobbs, Jr. said:

So do they come factory rigged? I am pretty sure that Skeeters come factory rigged with only yamahas. Is this the same for your new boat line or if someone wanted a E Tec could you do that?

Russ Baker said:

Ron,

I have both of these brands - Yamaha SHO and Mercury Pro XS's

Ronald Hobbs, Jr. said:

Sorry Russ I was at a 21st bday party, there was just nothing said about the motors that are getting rigged I think probably the #1 thing that goes wrong with anything is a motor I have never had a major problem happen with anyone boat. I guess without a motor your baot is no good.

Russ Baker said:

Ron,

We can take care of your Yamaha or Mercury.

Russ

Ronald Hobbs, Jr. said:

So what kind of motors are you putting on the back of these boats? I haven't heard anything about which motors you have decided to go with, along with a boat dealer don't you have to be a motor dealer as well?
I don't really know, all I know is that I take my boat back to my dealer and he takes care of all my service and warranty issues.

Russ Baker said:

Cliff,

Good to finally meet you as well. Thanks for stopping by the Open House. As soon as the motors arrive we will be having an on the water demo day on either Lake Sammamish or Lake Washington stay tuned....................

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page