Reel invasive trailer

Replies to This Discussion

Permalink Reply by Nick Berto on February 22, 2013 at 6:38am

Contact Daniel Bavery, he is the man!

Permalink Reply by Daniel Bavery on February 22, 2013 at 9:29am

Logan,

I designed a big beefy jig trailer for mop style jigs a couple years ago. Moving back down to Cali last year put a big hinderance on my ability to set up a shop again, but as soon as I move into my new house next month (like a mile from Basspro, hehe) I will be able to make them again. They are still a work in progress but initial tesing showed they are beastly.

 

There is also still a possibility they will be tailored to Tag Watsons jigs that are at Limit Out Marine so you should be able to get them in a couple months from there....fingers crossed.

 

If you look in my blog thing or photos on here you might see a picture or two of them, not really sure.

Dan

Permalink Reply by Daniel Bavery on February 22, 2013 at 9:29am

Word up Nick!
 
NickBerto said:

Contact Daniel Bavery, he is the man!

Permalink Reply by Logan Little on February 22, 2013 at 9:55am

Could I place an order in advance for when you get the shop back up and start producing again?

Permalink Reply by Daniel Bavery on February 22, 2013 at 10:15am

I would like to say yes, but I have no idea how much i will be charging, the colors, or exactly when I will even be able to make them. Ive been trying to get back on track making but life seems to happen way too often. I want to say April will be where but I cant guarantee anything as of now.

When it gets closer and stable, we can work something out for sure.

 

Dan

Permalink Reply by Logan Little on February 22, 2013 at 10:36am

Alright please contact me when that time comes? Can you post a pic of one?

Permalink Reply by Jake Anderson on February 22, 2013 at 10:38am

With a smile....anything is possible. 

Permalink Reply by Daniel Bavery on February 22, 2013 at 12:15pm

Ya when i am ready i will be posting all kinds of pictures and stuff, sending out some small sample packs and such. I will look for photos when I get home.

 

They will prob be close to an OZ each, so better come correct when adding to a jig!!!

 

 

Permalink Reply by Tag Watson on February 22, 2013 at 5:38pm

Best big fish jig trailer out there!

Daniel Bavery said:

Ya when i am ready i will be posting all kinds of pictures and stuff, sending out some small sample packs and such. I will look for photos when I get home.

 

They will prob be close to an OZ each, so better come correct when adding to a jig!!!

 

 

Permalink Reply by Daniel Bavery on February 23, 2013 at 7:43am

Thanks Tag, you the man.

 

Here is one picture of the initial design, but it will change a tad bit. You cant really tell, but they are quite heavy and thick, def a big bass trailer. With a decent sized jig they sit 6-7" long I believe was the initial design, but quite wide.

 

The slow is pretty slow because of the amount of plastic, but the recipe will change so it will fall faster if needed. Colors have not been chosen yet, the picture is the master i carved out of clay. They will be the typical colors more than likely, but with my twist on them. There was some styles i made for Chris Blandi a while back with special claws. Its hard to say if the features I put on the claws  did the trick, but he def caught a ton of bass on them. When they hit shelves up there you will see the features Im talking about, very simple but i feel effective.

 

Dan

Attachments:

• craw.jpg, 137 KB
• craw aquar1.jpg, 203 KB

Permalink Reply by Logan Little on February 23, 2013 at 9:58am

Do you have to use a punch rod due to its weight? Hell, my mops are only about 3/4 ounce and light enough to use on a standard jig rod.

Permalink Reply by Chris Blandi on February 23, 2013 at 11:32am

Tag said it before I could, best big fish jig trailer on the market.  Still waiting to get my hands on more.  You are at the back of the line Logan, but lucky for you it may be a short line.  Don't people like to catch big fish ? 

• ‹ Previous
• 1
• 2
• Next ›
• Page